Plastic Pipe-Connection Of PVC Plumbing

PVC plumbing main connection method is socket connection, adhesion and elastic sealing connection, but also the use of threaded and flange connection.

1. Cutting: Use a fine-tooth saw, knife or special PVC-U cutting tool to cut the pipe vertically according to the required size.

2. Clean up: Remove burrs and burrs with a guillotine and chamfer them at the ends. Before applying the adhesive, clean the adhesive surface debris, dust, water, and grease from the socket with a dry cloth.

3. Smearing: Use a brush to evenly apply the special adhesive to the bonding surface of the socket.

4. Pour in: Locate the center of the tubing and fittings, quickly insert the socket into the socket and turn 1/4 turn so that the adhesive is evenly distributed and solidified.

5. Keep: Wipe off the excess adhesive on the surface of the pipe with a cloth and allow it to pass the water pressure test after 24 hours of connection.

We are a professional supplier of pipe materials in China. Our products include: PVC Valves, UPVC Pipe Fittings, etc. If you have any questions about our products, welcome to contact us.