How To Ensure The Smooth Installation Of PPR Hot Water Pipe?

PPR Pipe is used in many large hospitals, laboratories, and factories. In order to ensure the smooth installation of the pipe, there are some things to be aware of in the installation.

1. Pay attention to protection: PPR Hot Water Pipe has lower hardness and rigidity than metal pipe. It should be protected during handling and construction to avoid mechanical damage caused by improper external force. In the process of installation, it is necessary to pay attention to the carrying on the glove. After that, the location of the pipeline should be marked to avoid damage to the pipeline due to secondary decoration.

2, pay attention to the temperature: For the pipeline in the installation process need to pay attention to the temperature, PPR tube below 5 ° C there is a certain low temperature brittleness, winter construction should be careful, cut with a sharp knife with a sharp knife. The installed pipelines should not be stressed or knocked, and if necessary, covered with protective parts.

3. Pay attention to the installation method: In order to ensure the effectiveness of the PPR pipe in the installation effect, the PPR pipe should be connected with the metal pipe or the water device using a mechanical connection such as a threaded insert or a flange. Integrate the pipeline without leakage points and reduce the existence of problems.

For the installation requirements of PPR pipes, it is necessary to pay attention to the above, and it can be guaranteed that there will be no quality problems during the installation process.